Below is some pictures of me repairing the damage I inflicted on the main bulkhead.

Some of the damage
Same damage different view.
To restore the plane surface of the bulkhead I clamped it to a thick piece of plywood.
At the fracture I hollowed out a piece of the Divinycell core to give place for NM-epoxy and carbon rowing.
The carbon rowing in place being covered with epoxy putty.

The pictures shows the rupture. There was also damage in a secound place. Later the deck and side deck will be attatched to the bulkhead. The parts together will give plenty of strenght.

To be continued…

Regards Yrvind.